Mold Damage Repair in Memphis, TN

Licensed & Insured | IICRC Certified | Complete Restoration After Mold Removal

Call (901) 902-4178 — Free Estimate

Mold remediation does not end when the mold is removed. The contaminated materials that were cut out during remediation — drywall, insulation, flooring, baseboards, cabinetry, and sometimes structural framing — all need to be replaced and restored. Memphis Mold Remediation Pros provides complete mold damage repair services to bring your property back to its pre-mold condition, ensuring the work is done correctly to prevent recurrence.

Many mold remediation companies remove the mold and leave you with exposed framing, missing drywall, and torn-out flooring. We handle the entire process from initial mold inspection through final restoration so you deal with one company, one timeline, and one point of accountability.

What Gets Damaged During Mold Remediation?

Professional mold remediation requires removing contaminated porous materials that cannot be effectively cleaned. In a typical Memphis mold remediation project, this includes:

• Drywall — Cut back at least 2 feet beyond visible mold growth to ensure all contamination is removed
• Insulation — Fiberglass and cellulose insulation that contacts mold must be completely removed and replaced
• Carpet and carpet pad — Porous flooring that absorbed moisture and mold cannot be saved
• Baseboards and trim — Often removed during remediation and replaced during repair
• Cabinetry — Particleboard and MDF cabinets with mold damage typically require replacement
• Subfloor — Plywood or OSB subflooring with extensive mold penetration may need partial replacement
• Structural framing — In severe cases, studs and joists with deep mold penetration are sistered or replaced

Our Mold Damage Repair Process

1. Post-Remediation Verification — Before beginning repairs, we verify that mold testing confirms the remediation was successful and the area is safe to rebuild
2. Moisture Verification — We confirm all building materials have dried to acceptable moisture levels. Rebuilding over damp materials in Memphis’s humid climate would immediately create new mold conditions
3. Structural Repairs — Replace or reinforce any compromised framing members, sistering joists, and replacing structural sheathing as needed
4. Insulation Installation — Replace removed insulation with new, properly rated material. For crawl spaces, we often recommend closed-cell spray foam for superior moisture resistance
5. Drywall Installation — Hang, tape, mud, and finish new drywall to match existing surfaces. We use moisture-resistant (green board) drywall in bathrooms, kitchens, and areas with known moisture exposure
6. Flooring Replacement — Install new carpet, hardwood, tile, LVP, or other flooring to match existing materials
7. Trim and Finish Work — Replace baseboards, crown molding, door casings, and other trim. Prime and paint all new and affected surfaces
8. Cabinet and Fixture Reinstallation — Replace cabinets, vanities, and fixtures removed during remediation

Preventing Future Mold After Repairs

Memphis’s year-round humidity means mold prevention must be built into every repair:

• Moisture-resistant materials — We use mold-resistant drywall, treated lumber, and closed-cell insulation in vulnerable areas
• Vapor barriers — Properly installed in crawl spaces and basements to block ground moisture
• Ventilation improvements — Upgrading bathroom exhaust fans, ensuring proper attic ventilation, and improving air circulation in enclosed areas
• Drainage corrections — Addressing the water source that caused the original mold problem — grading, gutter repairs, plumbing fixes

Repair Costs and Insurance

Mold damage repair costs vary based on the scope of remediation:

• Small area (under 50 sq ft) — $500 to $2,000 for drywall, insulation, and paint
• Medium area (50-150 sq ft) — $2,000 to $5,000 including flooring and trim
• Large area (multiple rooms) — $5,000 to $15,000+ including structural repairs

If your mold was caused by a covered peril (burst pipe, storm damage), your homeowners insurance typically covers both remediation and repair costs. We provide detailed documentation to support your claim.

Service Areas

We provide mold damage repair throughout the Memphis area including Germantown, Bartlett, Collierville, Cordova, Midtown Memphis, East Memphis, Southaven, MS, and Olive Branch, MS.

Get a Free Repair Estimate

Need mold damage repaired? Call (901) 902-4178 for a free estimate on complete mold damage restoration in Memphis.

Frequently Asked Questions

What needs to be replaced after mold remediation?

Typically drywall, insulation, carpet/pad, and baseboards need replacement. Depending on severity, cabinets, subflooring, and structural framing may also require replacement. Hard surfaces like concrete, metal, and solid wood can usually be cleaned and treated without replacement.

How much does mold damage repair cost in Memphis?

Small repairs start around $500-2,000. Medium projects run $2,000-5,000. Extensive repairs involving multiple rooms, structural work, and full restoration can exceed $15,000. We provide free detailed estimates before work begins.

Can you repair the damage after removing mold?

Yes. We are a full-service company that handles both mold remediation and complete repair/restoration. This means one company, one contract, and one point of accountability from start to finish.

How long does mold damage repair take?

Small repairs take 2-3 days. Medium projects take 1-2 weeks. Large restoration projects involving structural repairs may take 2-4 weeks. We provide a detailed timeline with your estimate.